The hydraulic system may seem complicated, but they are not as bad as many people think. Routine care practice can make you familiar with the components so that you can diagnose potential problems before they pass into serious trouble and perform necessary hydro restoration.
The system usually has hoses, lines, motors, cylinders and pumps and filters, and valves, among others. Larger components such as pumps and cylinders and motors interconnected with fittings, lines, and hoses. Learning simple maintenance practices can go a long way in keeping your system in top shape.
Prevention is the best approach to problems with any system. Start by ensuring that contaminants are kept out of the system to keep failures and common problems at bay. In case you suspect contamination, then you can take other steps.
Clean the area on the dip stick and filling the hydraulic filter and plugs it before removing to check or change the fluid. Pour hydraulic fluid directly into your system and keep all liquid containers tightly closed when storing.
Consider changing filters and fluids after the first 50 hours of use to remove any contaminant particles. You can check your manual for the manufacturer's recommendation.
Check the pump for external damage and wear it on a regular basis and have the problem taken care of as soon as possible. Apart from this, you should be attracted to cavitation every 50 hours and here is how you can do this.
Listen to you when operating the hydraulic pump. Sound or vibrate could mean cavitation occurs and you need to shut the system down immediately.
Check the filter and fluid levels for each flow is limited or restricted. You also need to check for any changes in the components of the pump, and the reservoir inlet line to affect the flow of the pump inlet.